Sleeper and PvP Dominix Setup

I’ve always been a active armor tanker so I wanted to experiment with a buffer armor tanking Dominix for Sleeper and PvP combat. Please note that I do not have Tech 2 Large Rail skills yet. What should go in the mid slots? I don’t have any experience with ECM so I am looking for advice.

[Dominix, WH-PVP]

Damage Control II
Energized Adaptive Nano Membrane II
Energized Adaptive Nano Membrane II
1600mm Reinforced Rolled Tungsten Plates I
1600mm Reinforced Rolled Tungsten Plates I
1600mm Reinforced Rolled Tungsten Plates I
Armor Explosive Hardener II

Cap Recharger II
Sensor Booster II
Target Painter II
Omnidirectional Tracking Link I
Stasis Webifier II

350mm Railgun I, Caldari Navy Antimatter Charge L
350mm Railgun I, Caldari Navy Antimatter Charge L
350mm Railgun I, Caldari Navy Antimatter Charge L
350mm Railgun I, Caldari Navy Antimatter Charge L
350mm Railgun I, Caldari Navy Antimatter Charge L
Drone Link Augmentor I

Large Trimark Armor Pump I
Large Trimark Armor Pump I
Large Trimark Armor Pump I

Medium Armor Maintenance Bot I x5
Ogre II x5
Hammerhead II x5

Dominix - WH2 Trimark


1.22 B Jita Gank

A week’s worth of WH mining exploded outside 4-4 in Jita last week under the guns of a ganking Hyperion.

ISK Dropped: 1.137 B
Hauler ISK Value: 83.8 M

Killmail (Battleclinic.com)

A recent Eve forum post got me thinking about better hauling tactics and how to deal with passive cargo scanning gank ships. From now on, I am not going to haul anything more than 400-500 M in one trip and I will load up the minerals in Giant Secure Containers.

What are some of your hauling tactics?


Rorqual Operation, Success

A 3 month long corp objective was completed in the late hours of Eve universe a few nights ago. We set our sights on getting a Rorqual in WH space for ore compression. For those that don’t know the function of a Rorqual, it is a capital mining support ship that when in siege mode, can compress ore down (with the aid of BPO’s) to a fraction of their original size. High-end ores like Arkonor, Bistot and Crokite compress down 20:1 and low-end ores at 40:1.

In WH space you are limited to using POS refinery modules to refine ore which yield a maximum of 75%. With proper standings in empire, you can get close to a 100% refine rate. When dealing with multi-billion ISK ore hauls from WH space, you want that additional 25%.

With some corporate funding, we purchased a Rorqual in a lowsec system in the Citadel for around 1.5 B. Now we just needed to wait for a nullsec WH link with proper mass limitations to allow the ship to enter the WH system. After waiting for a few days, we got the link.

Our route led us through two lowsec systems, a Blue nullsec system and unclaimed system in the middle of hostile nullsec.

  1. The Citadel, Kubinen  (0.42). Caldari State
  2. Sinq Laison, Aliette (0.37). Gallente Federation
  3. Domain, Mai (0.43). Amarr Empire
  4. Providence, (0.0). Curatores Veritatis Alliance (CVA)
  5. Catch, JGW-OT (-0.37). Currently unclaimed, but in Ushra’KhanAAA Citizens, and Against ALL Authorities territory.

Dropping cynos in Sinq and Domin were easy. We lost a cheap frigate to the locals, but that was expected as creating a cyno makes an object on the overview that ANYONE in the system can warp to. For the jump into CVA space, we contacted a known diplomat that helped us find a system with no Cynosural System Jammer.

During the Rorqual move, a hostile chatted in local in WH space and was identified to be in a Buzzard (Caldari Covert Ops).

[01:31:33] Issabella > rip

We looked up this character and it was a member of the Ushra’Khan Alliance. She probably came in from the hostile nullsec WH since it was in the middle of their territory. We saw several Sisters Core Scanner Probes in system, but decided to move the Rorqual anyway. We had 3 combat ships ready to engage if needed in WH space if the Rorqual got warp scrambled.

It came time for the last cyno into hostile space and after scouting out local, which had 2-5 neutrals in it, we decided to go for the final jump. I took a cheap frigate into k-space, dropped the cyno right outside the WH entrance, watched the Rorqual jump into the system, and initiated a self-destruct. This way, the cyno was only active during the 2 minutes that my ship was alive.

Cyno, Cyno Cruiser, WH and Rorqual

Cyno, Cyno Frigate, WH and Rorqual

The Rorqual made it through the WH and warped safely to the POS bubble. After figuring out how to use the Industrial Core I Siege Module and ore compression BPO’s, we were able to start compressing ore.

Ore Compression

Ore Compression

Five hangars of ore (1.4 M M3 x 5 = 7 M M3) compressed down to around 50,000 M3 which we hauled out to Empire via a C2 WH and refined at nearly 100% — more profit.

After the operation was completed, my WH partner sent out a corp-wide message.

2009.10.16 13:21
Just like to say a big thankyou to —, — and — for helping to get the Rorqual from Kubinen to our current nullsec entrance.

The whole operation went smoothly without misshap to the rorqual which is currently nestling comfortably at the J-Gamma POS.

All in all the whole thing was a success which pays a great testament to the teamwork that makes — the best corperation there is 🙂

As the mining starts to wind down over the next week I would still like to offer the PVP/PVE folks the chance to join us as we’ll be raiding the neighbour C2 for their complexes.  This will be a great introduction to W-space guarilla warfare.

Thanks also to our directors which made the purchase of the Rorq possible.  Time to look for the next milestone project.  titan anyone?


Scanning Ship and Skills

My WH partner and I have been making some good profits in the last few days.

Early October Profits

Early October Profits

So you want a piece of the action? Well, you need to be able to find routes back to a trade hub in empire and to do so quickly. A good scanning ship in WH space with proper support skills is invaluable in WH space. Below is my Helios (Gallente Covert Ops) scanning ship and skills.

[Helios, Scanner]
Overdrive Injector System II
Overdrive Injector System II
Nanofiber Internal Structure II

Cap Recharger II
Cap Recharger II
Cap Recharger II
1MN MicroWarpdrive II
Low Frequency Sensor Suppressor I, Scan Resolution Dampening

Sisters Core Probe Launcher, Sisters Core Scanner Probe I
Covert Ops Cloaking Device II

Small Gravity Capacitor Upgrade I
Small Gravity Capacitor Upgrade I

This ship is speedy at 3308 m/s with Level V skills. If you ever get caught in a bubble (remember this is 0.0) or warp scrambled, you can hit the MWD and zoom away. If the aggressor is in close, you can use the Sensor Suppressor to reduce their sensor range and targeting speed.

When you need to scan down a link to k-space, you need to do it quickly. Having the additional skills on top of your Covert Ops bonuses will help you pin signatures faster; take the time to train them.

Astrometrics IV
Astrometric Acquisition to III. 10% reduction in scan time for each level.
Astrometric Pinpointing to III. 10% reduction in scan deviation for each level.
Astrometric Rangefinding to III. 10% increase to scan probe strength per level.

With this setup, I am able to scan down a new system in 15-30 minutes and get a lot of the signature types at 2 or 4 AU. Being able to quickly identfy the type, such as Ladar/Gravimetric/Magnetic/Radar, means you can move on to the next signature to find the coveted wormhole links.

When you pin a WH, bookmark it, warp to 100 K, cloak up and use Wormhole Thingie to find out what type of link you have found. Bring up the info on the WH and pay attention to the status. If you have found one that is on the verge of collapsing, disregard it and rescan in a few hours.

My corp uses the terms green, yellow, and red to refer to WH status. Green means that it has just formed and will last a 18/24 more hours. Yellow is used for WHs that are “beginning to collapse” and Red is for WHs that “probably won’t last another hour”.

Happy WH pinning!


Nyx Supercarrier Cost Estimation

Nyx Supercarrier BPO

Nyx Supercarrier BPO

Nyx Supercarrier Build Cost

Part Quantity Jita Average Part Total
Capital Armor Plates 165 5,325,750.00 878,748,750.00
Capital Capacitor Battery 165 4,426,793.36 730,420,904.37
Capital Clone Vat Bay 220 7,799,999.99 1,715,999,997.80
Capital Computer System 165 5,792,307.69 955,730,768.45
Capital Construction Parts 220 4,199,999.13 923,999,808.27
Capital Corporate Hangar Bay 220 5,962,885.28 1,311,834,761.20
Capital Drone Bay 550 3,779,996.62 2,078,998,142.32
Capital Jump Drive 220 6,200,030.00 1,364,006,600.00
Capital Power Generator 110 3,700,000.00 407,000,000.00
Capital Propulsion Engine 165 4,629,035.61 763,790,875.32
Capital Sensor Cluster 165 4,640,500.02 765,682,502.48
Capital Shield Emitter 110 5,250,000.00 577,500,000.00
Capital Ship Maintenance Bay 220 7,275,998.75 1,600,719,724.56
Total Cost 14,074,432,834.77
Parts m3 26,950,000.00

Nyx Mothership Build Cost

Part Quantity Jita Average Part Total
Capital Armor Plates 150 5,325,750.00 798,862,500.00
Capital Capacitor Battery 150 4,426,793.36 664,019,003.97
Capital Clone Vat Bay 200 7,799,999.99 1,559,999,998.00
Capital Computer System 150 5,792,307.69 868,846,153.14
Capital Construction Parts 200 4,199,999.13 839,999,825.70
Capital Corporate Hangar Bay 200 5,962,885.28 1,192,577,055.64
Capital Drone Bay 500 3,779,996.62 1,889,998,311.20
Capital Jump Drive 220 6,200,030.00 1,364,006,600.00
Capital Power Generator 100 3,700,000.00 370,000,000.00
Capital Propulsion Engine 150 4,629,035.61 694,355,341.20
Capital Sensor Cluster 150 4,640,500.02 696,075,002.25
Capital Shield Emitter 100 5,250,000.00 525,000,000.00
Capital Ship Maintenance Bay 200 7,275,998.75 1,455,199,749.60
Total Cost 12,918,939,540.70
Parts m3 24,700,000.00

Nyx Mothership Estimated Cost: 12.919 B
Nyx Supercarrier Estimated Cost: 14.074 B

Difference: +1.155 B